Skip to content

Hiding In The Shadows

Version History
Date Description
Jul 11, 2019 Initial draft

🚦

There are shadows under the sun.
There are shadows in your life.
There are shadows in your computer.

This note is about latency tolerance techniques.
This note is about how to get the most out of the otherwise-wasted resource.

Nanoseconds

Architecture solutions to attack nanosecond-level performance shadows that are mostly created by lower level data and instruction cache misses. OoO and SMT are the base to hide these latencies, but they fall short when ROB is full (or some other reasons). When that happens, these academic ideas come in rescue.

Runahead

Quote

In runahead, once the processor stalls, it uses the instruction window to continue to fetch and execute operations. The goal of runahead is to generate new cache misses, thereby turning subsequent demand requests into cache hits instead of cache misses.[5]

Papers

  1. Improving Data Cache Performance by Pre-executing Instructions Under a Cache Miss, ICS’97
  2. Runahead Execution: An Alternative to Very Large Instruction Windows for Out-of-order Processors, HPCA’03
  3. Efficient Runahead Execution: Power-Efficient Memory Latency Tolerance, IEEE Micro’06
    • Good timeline graphs show the benefit of Runahead.
  4. Runahead Threads to Improve SMT Performance, HPCA’08
    • QoS control policy.
  5. Continuous Runahead: Transparent Hardware Acceleration for Memory Intensive Workloads, MICRO’16
    • Nice idea to tackle the issue that runahead does not get enough time to run.
    • Also has the notion of ideal runahead coverage.

Comments

  • We should separate mechanism and policy.
  • Runahead is the mechanism. It includes:
    • Enter runahead
    • Execution in runahead context (most important thing is to maintain those INV bits and pseudo-retires)
    • Exit runahead
  • Prefetch is one of the policy, a major one. It’s the side effect of running instructions in the execution phase of runahead mode.
  • QoS control is another policy. This means adding specific rules to the execution phase. More specifically: limit the core resource usage of the runahead thread, thus reduce the impact on the co-running HW thread.

Helper Threads (or Precomputation)

Quote

A helper thread is a stripped down version of the main thread that only includes the necessary instructions to generate memory accesses, including control flow instructions [10].

Quote

Precomputation uses idle thread contexts in a multithreaded architecture to improve performance of single-threaded applications. It attacks program stalls from data cache misses by pre-computing future memory accesses in available thread contexts, and prefetching these data.[1]

Quote

Such pre-execution threads are purely speculative, and their instructions are never committed into the main computation. Instead, the pre-execution threads run code designed to trigger cache misses. As long as the pre-execution threads execute far enough in front of the main thread, they effectively hide the latency of the cache misses so that the main thread experiences signicantly fewer memory stalls.[5]

Papers

  1. Speculative Precomputation: Long-range Prefetching of Delinquent Loads, ISCA‘01
  2. Dynamic Speculative Precomputation, Micro‘01
    • Take a step further by using HW to construct the offloaded code slice automatically.
  3. Execution-based Prediction Using Speculative Slices, ISCA‘01
  4. Tolerating Memory Latency through Software-Controlled Pre-Execution in Simultaneous Multithreading Processors, ISCA‘01
    • What’s up with ISCA‘01? This paper proposed to use software to control when to start running precomputation and when to exit. It uses compiler’s help to generate those code slices, and insert special start/end instructions. On the contrast, hardware-controller precomputation relies on hints such as cache misses.
  5. Design and Evaluation of Compiler Algorithms for PreExecution, ASPLOS‘02
    • 5.1 A Study of Source-Level Compiler Algorithms for Automatic Construction of Pre-Execution Code, TOCS‘04
  6. Dynamic Helper Threaded Prefetching on the Sun UltraSPARC® CMP Processor, Micro‘05
    • The function table at helper thread seems nice and useful.
  7. Accelerating and Adapting Precomputation Threads for Effcient Prefetching, HPCA‘07
    • Dynamically construct precomputation code, called p-slices. They can adapt the same program differently depending on the program’s data input and the underlying hardware architecture.
  8. Inter-core Prefetching for Multicore Processors Using Migrating Helper Threads, ASPLOS‘11
    • Pure software solution. I like the idea. But I don’t think it will work for realistic applications.
    • Learned setcontext(), getcontext(), and swapcontext().
  9. Bootstrapping: Using SMT Hardware to Improve Single-Thread Performance, ASPLOS‘19
  10. Freeway: Maximizing MLP for slice-out-of-order execution, HPCA‘19
    • Strictly speaking this is not in this catogory. But it is this paper that lead me to Runahead and Helper thread topic. I was doing something similar so those techniques caught my eye.

Comments

  • The catch about precomputation is that it must create lightweight threads that can actually proceed faster than the main thread, so that they stay out in front.
  • Other catch is: you also need to create the code slice that will run on another core context. First of all, how is this code slice different from the original code? The extracted code will be simplified in the sense that it will only access memory without doing other computations. The second question is how this code slice is extracted and then constructed? There are many ways. You can handwrite, or use a static compiler to pre-generate them (by using techniques in above papers), or use hardware to dynamically generate them during runtime, or use software to dynamically generate them during runtime. There are ways to it, but I don’t think this is the core of precomputation.
  • Also, same thing here, we should separate mechanism and policies. Helper thread (or precomputation) is mainly used as a vehicle for speculatively generating data addresses and prefetching.

Thread-Level Speculation

Fill me in.

Locks

Applying the insight of “get the most out of the otherwise-wasted resource” to the lock area. I will wait for Sanidhya’s SOSP‘19 paper. :-)

Misc

  • Stretch: Balancing QoS and throughput for colocated server workloads on SMT cores (Best Paper), HPCA‘19
    • Keyword: ROB, Co-location QoS.
    • This paper tackles the perf interference when running co-running two SMT threads on a single physical core, which is the common case in datacenters. However co-running latency-sensitive jobs and batch jobs will have huge impact on the perf of both.
    • This paper found: “Latency-sensitive workloads show little benefit from large ROB capacities in modern server processors .. because frequent cache misses and data-dependent computation limit both instruction and memory-level parallelisms (ILP and MLP). In contrast, many batch workloads benefit from a large ROB that helps unlock higher ILP and MLP.”
    • So they propose to have a ROB partition scheme rather than static equal partition. Of course they also did some very extensive studies before deciding to scale ROB. They first found shared ROB has the biggest impact on perf interference than any other resources such as branch predictor, cache, and so on. They further found that latency-sensitive workload can tolerate some perf slack, which means they will not violate their QoS even with a smaller ROB.
    • Anyway, I think this is a very nice paper. Good reasoning, simple solution, but works effectively.

Put it all together

  • Both runahead and helper thread were proposed to do prefetch. But they have a key difference. Runahead is invoked in the same core, and is invoked when ROB is full (not always though). Helper thread is invoked at another core. Besides, runahead can just fetch the instructions and run, no need to cook another code slice. But for helper thread, it needs to extract a code slice that will run on another core.
  • I think the most important thing is to realize their insight. In the most straightforward and plain way: they are trying to get the most out of the otherwise-wasted resource. For example, in runahead, they realize that with some help, the CPU is still able to generate cache misses even if the instruction table is full. For precomputation, obviously it is using the other idle cores. The simple insight itself is not interesting enough, usually where it’s applied make things quite interesting.

Microseconds

Fill me in

Milliseconds

Sleep. And wake me up when september ends. And this seems to be enough. ;-) This is true for OS to handle slow HDD and slow network.

Last update: October 4, 2019

Comments

Back to top